11/24/2021

Drivers Coges Port Devices

In computing, a device driver is a computer program that operates or controls a particular type of device that is attached to a computer or automaton. A driver provides a software interface to hardware devices, enabling operating systems and other computer programs to access hardware functions without needing to know precise details about the hardware being used. Press simultaneously the Windows and R keys on your keyboard. Type in regedit in the Run dialogue.

Summary :

This device is disabled. (Code 22) is an issue that happens to your computer hardware. When you are bothered by this issue, you can’t use the hardware as normal. To help you solve this issue, MiniTool Software has collected some useful solutions. You can read this article to get them.

Quick Navigation :

Are You Bothered by Error Code 22 in Device Manager?

Your computer hardware might encounter different kinds of issues. You only discover the issues when you want to use it. But, at first, you just see that the device is not working normally. But, you don’t know why the hardware can’t work.

In a situation like this, you can go to the Device Manager to check the status of the device and then you can see what happens to the device. If there is something wrong with the hardware, you will see an error message with an error code.

Here are some common error messages you may receive:

  • This device is disabled. (Code 22)
  • And more….

Drivers Coges Port Devices Online

We have talked about the above error codes except error code 22. If you are bothered by code 37, code 43, or code 10, you can access the above pages to get the solutions. While, if you are facing error code 22, this article is helpful.

What This Device Is Disabled. (Code 22) Is?

The Device Manager error code 22 means that the device was manually disabled by you or others. But, if Windows forces to disable that device because of a lack of system resources, this error can also happen.

The error code 22 in Device Manager is displayed as follows:

Here, you should know that the Device Manager error codes only happen in Device Manager. If you find the same error code elsewhere on your Windows computer, it is not the error code we will talk about in this article.

Besides, this error code 22 can happen to any hardware on your computer no matter you are running Windows 10, Windows 8/8.1, or Windows 7.

Next, we will show you how to solve this error code 22 in different methods. You can try the following solutions one by one until you find the most suitable one.

How to Fix Error Code 22 in Device Manager?

Drivers coges port devices list
  1. Enable the device on your computer
  2. Restart your computer
  3. Undo the changes to the device’s driver
  4. Reinstall or update the device’s driver
  5. Reset CMOS/BIOS
  6. Update BIOS
  7. Try another expansion slot
  8. Replace the faulty hardware
  9. Perform a Windows auto repair
  10. Perform a clean install of Windows

Fix #1: Manually Enable the Device

In case that you have disabled the device by accident and caused error code 22, you can access Device Manager to have a check. If yes, you need to manually enable it.

You can follow these steps to enable a device on your Windows computer:

  1. Search for device manager in the search box.
  2. Select the first search result and you will enter Device Manager.
  3. Go to find the device that is disabled from the device list.
  4. Right-click on the device and select Properties from the pop-up menu.
  5. Switch to the Driver tab.
  6. If you find the device is disabled, you need to press the Enable Device button to enable the device.
  7. Press OK to keep the change.
Sale

After these steps, the issue should be solved and you can go to check whether you can use the device as usual.

However, if you find the device is enabled but the error code 22 still persists, you need to use another method to fix the issue. The next one might be helpful.

Fix #2: Reboot Your Computer

This device is disabled. (Code 22) can also be caused by some temporary issues related to the target hardware. It is easy to fix the temporary issue: you can just restart your computer to have a try because rebooting a computer always fixes problems.

A computer rebooting will not take you much time and it is also proved to be an effective solution. Please remember that you’d better restart your computer in a proper way to avoid triggering a new issue.

Fix #3: Undo the Changes to the Device’s Driver

Now, think carefully whether you have made a change to the driver for the device before the error code 22 appears. If yes, the change should be the cause of the error. Then, you need to undo the change to fix the problem.

We will list some cases below. You can choose the one that fits you:

  • Remove the newly installed device from the computer.
  • Roll back the device’s driver to the previous version.
  • Perform a system restore to undo the recent changes to the device’s driver.

Fix #4: Reinstall or Update the Device’s Driver

If the third solution doesn’t work, you can also reinstall or update the driver for the device to have a try.

Reinstall the Driver for the Device

If the device’s driver is damaged or corrupted, the error code 22 can also appear. In a situation like this, you can reinstall the driver to fix the issue.

Here are the things you can do:

1. Open Device Manager.

2. Go to find the device that is bothered by the code 22 error and then right-click on it.

3. Click Uninstall device.

Tip: If it is a USB drive that is bothered by the code 22 error, you need to uninstall all the devices under the Universal Serial Bus controllers hardware category. This includes the USB Mass Storage Device, USB Host Controller, and USB Root Hub options.

4. Close Device Manager and then reboot your computer.

After rebooting, Windows will automatically reinstall the device’s driver.

Update the Driver for the Device

The error code 22 can also be caused by an outdated device’s driver. To rule out this issue, you can follow these steps to update the driver for the device:

1. Open Device Manager.

2. Find the target device and right-click on it.

3. Select Update driver from the pop-out menu.

4. Select Browse my computer for driver software.

5. Select Let me pick from a list of available drivers on my computer.

6. Click Next.

7. Select the device driver you want to install for the hardware.

8. Click Next.

The driver update process will start and you need to wait until the entire process ends. After that, you need to restart your computer

After computer reboot, you can go to check whether the error code 22 disappears.

Fix #5: Reset CMOS/BIOS

As mentioned above, the error code 22 can be caused by a lack of system resources. To solve the problem, you should clear CMOS (AKA reset BIOS settings).

If this method doesn’t work, you can try the next one.

Fix #6: Update BIOS

An outdated BIOS version is another cause of the code 22 error. So, you can update BIOS to correct the error.

Fix #7: Try Another Expansion Slot

If the hardware with the error code 22 is a kind of expansion card, you can connect the device to another expansion slot on the motherboard to see whether the error code go away. Although this is a rare situation, it is still worth trying.

Fix #8: Replace the Faulty Hardware

Com Port Driver

If all the above solutions don’t work for you, the hardware should be damaged. You can purchase a new one to replace it. But, the detailed operations for different computer hardware are various.

For example, if you encounter the graphics device driver error code 22, there is no need to worry about the data loss issue.

However, if the device is a data storage drive, there should be some important files in it. So, you’d better rescue the files in it with professional data recovery software. MiniTool Power Data Recovery should be your best choice.

This software offers a secure data recovery service because it recovers your data without influencing the data storage medium as well as the files in it. And the most important point is that the scan results contain both existing and deleted files in the drive.

It is designed with four recovery modules including This PC, Removable Disk Drive, Hard Disk Drive, and CD/DVD Drive. No matter you want to restore files from computer hard drives, memory cards, SD cards, pen drives, or CD/DVD discs, this software is always available.

With the trial edition of this software, you can check whether it can find your needed items (but you can’t use this trial edition to recover the scanned files). You can press the following button to get this freeware.

Suppose that the SD card is damaged and you want to rescue data from it:

1. Install the software on the computer.

2. Connect the SD card to the computer via a card reader.

3. Open the software and you will enter the This PC interface directly.

4. The target SD card will be displayed on the software interface. You need to select the card and press the Scan button to start the scanning process.

Tip: If you have partitioned the SD card, you’d better use the Removable Disk Drive module instead because it can scan the whole drive at once.

5. You need to wait patiently until the entire scanning process ends. Then, you will see the scan results that are listed by path.

You can unfold each path and then find the files you want to restore. At the same time, the Find and Type features of this software can also help you find your needed files easily and quickly.

If you can find your needed files from the scan result using this free file recovery tool, you can use a full edition of this software to recover them without limits. This software has various editions for different usages. You can select one according to your actual situation.

Now, you will not worry about your important data on the drive and you can feel free to replace the faulty drive with a new one.

Fix #9: Two More Solutions

If you are sure there is nothing wrong with the computer hardware and all of the above solutions don’t work for you, you consider performing a Windows auto repair. If it is useless, you can clean install Windows to get rid of the error code 22 in Device Manager.

Bottom Line

When you are facing this device is disabled. (Code 22), you should not worry about it. The solutions mentioned in this article are available for you to solve the issue.

Should you have any questions when you are solving this code 22 error or using this MiniTool data recovery software, you can contact us via [email protected] or let us know in the comment.

This Device Is Disabled. (Code 22) FAQ

  1. Enable the device on your computer.
  2. Restart your computer.
  3. Undo the changes to the device’s driver.
  4. Reinstall or update the device’s driver.
  5. Reset CMOS/BIOS.
  6. Update BIOS.
  7. Try another expansion slot.
  8. Replace the faulty hardware.
  9. Perform a Windows auto repair.
  10. Perform a clean install of Windows.
When you connect a drive to your computer, the driver for that device will be automatically installed on your computer. On the other hand, you can go to the website of the driver’s manufacturer to manually download and then install the driver on your Windows computer.

You can use the Windows Driver Verifier Utility. To access and use this tool, you can follow these steps:

  1. Open CMD as an Administrator.
  2. Type verifier in the command prompt interface and press Enter.
  3. Select Create Custom Settings (for code developers) on the pop-up Driver Verifier Manager window and press Next.
  4. In the new window, you can use all tests (expect DDI Compliance Checking (additional) and Randomized low resources simulation) to check for the drivers.
  5. Follow the wizard to finish the job.
  1. Open Device Manager.
  2. Go to find the device that you want to check.
  3. Right-click on the device and select Properties.
  4. You can check for the status for the device’s driver.

Contents:

Unknown Device Issue Overview:

As long as there is a device not working on Windows 10, not recognized or incompatible, you may notice this device displays as unknown device with a yellow exclamation in Windows 10 Device Manager.

For instance, after you plugged in the USB device, your USB mouse or keyboard doesn’t work at all and when you check it in Device Manager, there are one or more unknown devices showing under Other devices branch in Device Manager.

In short, this unknown device Windows 10 issue comes up due to mainly two aspects, the one is that Windows 10 can’t detect the hardware, not to mention to find the driver for the device, and the other one lies in that the device driver is incompatible with Windows 10.

Drivers Coges Port Devices

What is Unknown Device?

Unknown device means a device cannot be recognized by Windows 10, show it renamed as an unknown device in device manager. Many devices can be called as an unknown device if Windows 10 cannot recognize it and cannot install a driver for the device, such as a graphic card, audio card, touchpad, mouse, keyboard, Bluetooth devices, USB devices etc. This often happened after you upgrade your system from Windows 7, 8 to Windows 10 or you plug a new external device on Windows 10.

How Do I find a Driver for an Unknown Device?

As Windows 10 cannot identify the hardware, it cannot install a right driver for the device, Windows 10 unknown device in Device Manager error code 28 or any other device manager error codes pop up. You can find what your error code is from Driver Properties.

Whatever your error is, USB unknown device or any other device unfound, you can make full use of the ways below to find a driver for your device and enable Windows 10 to recognize the device. At the very beginning, you are supposed to find a driver for an Unknown Device. If no driver is found for the unknown device in Device Manager, perhaps you need to troubleshoot more problems on Windows 10, such as system file, hardware error, etc.

Solutions:

Solution 1: Using Hardware ID to Find Drivers for Unknown Devices

In the first place, you can use the hard id to find the driver for Windows 10 unknown device. In some conditions, maybe you can’t find the device name, so you are unable to find the unknown device driver from the official site or from the Internet. But every device has a hardware id, so if you know the hardware id of a device, you can use the hardware id to fix the unknown device driver issue. Here is the solution you need: how to use hardware Id to find a driver.

Solution 2: Update Unknown Device Driver

Possibly, besides hardware ID, you can get the right driver for Unknown device by updating it in Device Manager. The process of updating a driver is to find the device driver for Other devices.

Update Unknown Device Driver Via Device Manager:

1. Open device manager.

2. Expand Other devices and choose the Unknown devices.

3. Right-click it and select Update Driver Software.

This action will let Windows search the driver in the local disk and online to find a driver for the unknown device.

Using the device manager can to some degree install the right driver for the unknown device. So if this way can help solve unknown device problem, it will be good.

If this cannot help, try to install a compatible device driver from other methods.

4. Choose another option of Browse my computer for driver software.

5. Choose Let me pick from a list of available drivers on my computer. This will show compatible devices drivers and all drivers in the same category as the device.

6. In the compatible hardware list, check Show compatible hardware and you can choose the model to install this driver to replace it for your unknown device.

After it is installed, the unknown device error may disappear and the real device may be listed in device manager. If required, you would better restart Windows 10 to take effect.

Update Unknown Device Driver Automatically:

If the device manager cannot solve find a driver for the unknown device, you can try to a professional and safe driver updating tool – Driver Booster. You can use Driver Booster to identify the unknown device and then download or update the driver. Furthermore, Driver Booster is capable of fixing various error code in Device Manager, now that unknown device doesn’t have a driver, you can manage to fix the error code by Driver Booster.

Usb Port Drivers

1. Download Driver Booster at first.

2. After installing and running it on Windows 10, hit Scan to find out which drivers are missing, which drivers are incongruent, which drivers are faulty on your PC.

3. Then locate the driver for the unknown device to Update.

Drivers Coges Port Devices List

4. Here if you are not sure what device driver is causing the unknown device on Windows 10, it is feasible to Update Now to update all the device drivers for Windows 10.

Com port driver

Drivers Coges Port Devices Inc

Tips: How to Use Driver Booster to Fix Device Error Codes?

Here if you are encountering device error code 1 or 10 or whatever, you are able to fix the driver error code by Driver Booster.

After Driver Booster scanned for the problematic device drivers, on the left side, click Tools button and then hit Fix device error to let Driver Booster find out what causes unknown device appears in Device Manager.

When the drivers are installed, you can enter the device manager see there is still unknown device under Other devices. In some cases, it is likely that unknown device disappears from Windows 7, 8, 10 Device Manager as Driver Booster has found the driver for the undetected device.

Solution 3: Find Driver by Windows 10 Updates

In order to install the right driver for the unknown device so as to remove the device error, there is another way open to you, namely, finding a driver by checking Windows 10 updates.

1. Go to Start > Settings > Update & Security.

Drivers Coges Port Devices

2. Under Windows Update, on the right side, choose to Check for updates.

For some unknown devices, after Windows 10 update, Windows 10 not recognizing the device can be fixed successfully.

Solution 4: Disable Driver Signature

When the unknown device appears in Device Manager, it implies that the device drivers are not recognized or not working on Windows 10. And as you all know, there is a driver signature for every certified driver. But sometimes, you failed to find the driver for the device as Windows 10 can’t allow your PC to install the driver due to the factor of driver signature.

Hence, on the basis of the driver safety, it is worth a shot to disable driver signature enforcement to install the driver for unknown device. May it will fix Windows 10 unknown device error.

Solution 5: Run SFC

After upgrading the Windows 10, more than an unknown device pops up under Other devices. In some sense, other devices unknown device results from the corrupted system files on Windows 10. Therefore, you would better try to run the System File Checker to see if an unknown device will perish from other devices.

Drivers Coges Port Devices For Sale

1. Type in Command Prompt in the search box and then right click it to Run as administrator.

2. In Command Prompt, input sfc/scannow and then press Enter to activate SFC.

Then SFC will begin file checking and correct the problematic files if possible. You can head to Device Manager to check whether or not the unknown device still shows under Other devices.

In a word, you can follow the methods above to fix the unknown device driver error issue on Windows 10.

Related Articles: