Drivers Centurion Systems (pty) USB Devices

  1. Drivers Centurion Systems (pty) Usb Devices Bluetooth
  2. Drivers Centurion Systems (pty) Usb Devices 3.0

Advanced Driver-Assistance systems. The cutting-edge system designed by FleetCam is a highly integrated device with both ADAS & DMS features. It is developed to enhance commercial fleet safety by reducing accident and saving lives. Based on state-of-the-art deep learning and computer vision technologies. Download CENTURION device software for free and keep your CENTURION gate motor or access automation solution up to date with the latest firmware. Drivers for the USB Bootloader Interface Device.NET Framework v2.0 SP 2 is automatically downloaded by the installer, if required. Common USB devices, including PlayStation and Xbox controllers, can be used as soon as they are plugged in via USB. This is commonly referred to as Plug and Play (PnP). To set up any of these devices, plug it into your computer, Shadow Ghost, or Shadow Box, then start your Shadow. Shadow will automatically forward these devices for you.

This document is an early draft of a guide to using the USB sub-system under Linux. This document is matched to Linux kernel revision 2.3.99pre6. Some of this stuff is outright guesswork, especially the lesser known and more expensive devices. Gen2 DDE + Gen2 Converter USB Drivers (.exe 4.05MB) Gen2 DDE v5.00A (Release 1) and Gen2 Converter USB Drivers.

Application note - Character Conversion

Character to Card Data to ASCII character conversion for tracks 1,2, and 3


Overview, commands, and properties for The MagTek Device (MTD) Drivers for Windows. It is a collection of individual drivers that support a number of MagTek products.

OMTD OPOS - Programming Manual - ActiveX - PN D99875144

FOR MAGTEK DEVICES Programming Reference Manual - Features and requirements, installation for OMTD program. It is an extension of the MagTek Device Driver Program (MTD). The OMTD Program provides an OPOS-compliant application interface to MagTek products and works on Windows 95, 98, ME, NT, 2000, and XP. OMTD is in the form of a set of ActiveX controls (COs).


Drivers Centurion Systems (pty) Usb Devices Bluetooth

Features and specifications, installation, and operation for the USB (Universal Serial Bus), HID Keyboard Emulation, Full Size Swipe Reader. It is a compact magnetic stripe card reader, which conforms to ISO standards.

SystemsDemo Application Note RS232 & USB Demo

This comprehensive demo supports a number of MagTek RS-232 and USB products. - PN D99875136

MagTek Devices Safety and Maintenance, Cleaning Devices - PN D998200389

As part of the preventative actions for the Corona virus, it is important to clean equipment and surfaces. The Center for Disease Control (CDC) recommends cleaning and disinfecting high-touch surfaces and objects at least once daily. It is important to properly clean and disinfect your MagTek device.


Features and specifications, installation and operation OF The Model MT-211232, 3-Track, RS-232 Swipe Reader, is a compact magnetic stripe card reader which conforms to standards of the following: ANSI (American National Standards Institute), ISO (International Standards Organization), CDL (California Drivers License), and AAMVA (American Association of Motor Vehicle Administrators).

PORT POWERED SWIPE READER Technical Reference Manual

Features and specifications, installation, operation, properties and commands of the port powered swipe reader. The Port Powered Swipe Reader is a compact magnetic stripe card reader which conforms to ISO/ANSI standards.

Mag-Wedge Reader Installation and Operation Manual

Mag-Wedge Reader Installation and Operation Manual

Model MT-211232 RS232 Swipe Reader

Model MT-211232 RS232 Swipe Reader, Installation and Operation Manual, 1 or 2 track, buffered/ unbuffered modes

MagTek Response to NIST SP 800-131A re: Two-Key TDEA Encryption - PN D998200305

A response to a publication in March 2019, by NIST (National Institute of Standards and Technology) entitled: “NIST Special Publication 800-131A Revision 2 – Transitioning the Use of Cryptographic Algorithms and Key Lengths”.

Subscribe to Software RSS
MagneSafe SCRA Windows API and SDK - PN99510105 - v101

This Software Development Kit (SDK) contains the necessary tools to develop applications using MagTek USB HID Readers (Non Keyboard). The package is a Windows API/DLL which provides a demo application, sample code and documentation for the programming environment.

USB Swipe & Insert Reader - PN99510026 - v201

This program demonstrates card reading for the USB HID and keyboard emulation readers. It also allows a user to send commands that change the device's configuration for both the USB HID and keyboard emulation units. These commands can either be entered manually or downloaded from a MagTek supplied, or user-created, text file. This package also includes the demo application's source code to assist developers.

JPOS for Serial (RS-232) - PN99510098 - v102

This JPOS driver is intended for use with our RS232 Swipe readers.

OPOS 1.13 Driver Package for USB HID Swipe Readers - PN99510115 - v107

The OPOS driver for HID Swipe Readers may be used with our Dynamag, SureSwipe, DynaPAD, and non-SCRA USB swipe readers running in HID mode. This package will install the driver, documentation and test application. This driver does not support USB readers set to keyboard emulation mode. This driver supports our HID swipe readers with PID 002 or PID 011.

UPOS for 'POS for .NET 1.12' - PN99510087 - v103

If your reader application uses the POS for .NET 1.12 (UPOS) this service object will provide the ability to address our MiniMICR and MICRImage document scanners, and our Dynamag, SureSwipe, and non-SCRA USB swipe readers running in HID mode that have a PID 002 or PID 011.

Keyboard Wedge - PN99510106 - v101

The Keyboard Wedge DLL extracts information from the keyboard string and makes available the various properties from the card transaction. Both the MiniWedge and the full size keyboard wedge readers are supported.

What is the best way to contact support?
Contact support through email at [email protected] or submitting a ticket to the help desk at https://lap.magtek.com/ITS/logon.asp.
How to clean MagTek hardware?
  • As part of the preventative actions for the Coronoavirus, it is important to clean equipment and surfaces. The Center for Disease Control (CDC) recommends cleaning and disinfecting high-touch surfaces and objects at least once daily. It is important to properly clean and disinfect your MagTek device.
  • Below are suggestions to ensure proper cleaning of the EXTERIOR of your MagTek device and to help keep you and your customers safe. This includes cleaning and then disinfecting the device.
  • Clean the exterior of the device by removing any contaminants, dust, or debris using a soft, lint-free cloth. To clean your device, the lint-free cloth should be slightly dampened using a mild soap and water solution.
  • Follow with a soft, dry, lint-free cloth to remove any remaining/excess moisture.
  • Using a new soft, slightly dampened, lint-free cloth or wipe, disinfect all surfaces with a surface-appropriate disinfectant. We recommend using disinfecting wipes and/ or isopropyl alcohol wipes in concentrations between 70 and 90% percent. The higher the concentration the faster the cleaner will evaporate, which is better for protecting electronics.
  • Allow the device to dry completely.
  • Avoid using too much liquid while wiping.
  • DO NOT use liquid cleaning products or insert any other objects into the device.
  • Allowing liquid to get into the device’s internal electronics can cause irreparable damage and void the warranty.
  • Avoid damaging the read head, only clean the card path with approved cleaning cards.
  • DO NOT spray any cleaners directly onto your device.
  • Please reach out to [email protected] if you need additional assistance.
  • You can also download and link to the cleaning instructions here: https://www.magtek.com/content/documentationfiles/d998200389.pdf
(pty) What are the full size swipe card reader part numbers?
  • Full-Size 1, 2, 3 White HID - PN 21088065
  • Full-Size 1, 2, 3 White Keyboard Emulation - PN 21088066
  • Full-Size 1, 2, 3 Black HID - PN 21088068
There are no videos for this product at the moment.
  • Dynamag card reader supports USB HID or USB Keyboard emulation interfaces and is powered and connected via USB. Compatible operating systems: Windows and Android HID and KB mode. Mac OS in KB mode.

Just under 4 inches, Dynamag saves space on the countertop or in your custom build and still provides a long swipe path.

  • The Red/Green/Amber LED status indicator keeps you in the know.

MagneSafe® is a digital identification and authentication architecture that safeguards consumers and their personal data. Designed to exceed PCI regulations, MagneSafe leverages strong encryption, secure tokenization, counterfeit detection, tamper recognition, data relevance and integrity, and dynamic digital transaction signatures, which together validate and protect the entire transaction and each of its components.

MagTek readers have one of the highest first swipe read rates in the industry. This enables you to develop reliable hardware and systems that move lines faster and makes your customers happy.

Standard Configurations

Black, USB swipe reader21073062

General Information

Interfaces USB HID
USB Keyboard Emulation
Reference StandardsISO 7810, ISO 7811, AAMVA
Recording MethodTwo-frequency coherent phase (F2F)
Card Speed4 to 60 ips (10.1 to 152.4 cm/s)


Power Input5V from USB bus
Normal mode110 mA maximum
Suspend Mode500 uA maximum


Dimensions Length: 3.94” (100.0mm)
Width: 1.28” (32.5mm)
Height: 1.23” (31.3mm)
WeightWeight: 4.5 oz. (127.57 g)
Cable Length6 ft.
ConnectorUSB Type A plug


Drivers Centurion Systems (pty) Usb Devices 3.0

Drivers centurion systems (pty) usb devices pc camera
Operating-30 °C to 70 °C (-22 °F to 158 °F)
Storage-40 °C to 70 °C (-40 °F to 158 °F)
Operating10% to 90% noncondensing
Storage Storage
10% to 90% noncondensing
Operating0-10,000 ft. (0-3048 m.)
Storage0-10,000 ft. (0-3048 m.)

Speak with a sales rep to learn more about our solutions, get pricing info and order products.

Speak with a sales rep to learn more about our solutions, get pricing info and order products.

We've received your request and a member of our Sales team is working to contact you as soon as possible.

Check your email for a confirmation message, and let us know if you need to correct any of the contact info submitted.

Talk to you soon and thanks again for your interest in our products!