Download Altair Port Devices Driver

Download USB Port Fixer - Try to fix malfunctioning USB ports whose drivers are corrupted, outdated or unrecognized by Windows due to various reasons using this tool.

  1. Download Altair Port Devices Driver Windows 7
  2. Altair Software Download
  3. Download Altair Port Devices Drivers
  4. Download Altair Port Devices Driver Printer

The sSynScan USB adapter allows a more reliable wired connection between any Skywatcher Synscan Go-To mount and a PC and certain Android devices. The adapter plugs into the mounts hand control port and connects to a computer with a USB cable (printer type - not supplied). Users can then control a Skywatcher Go-To telescope from a computer by using either the SynScan Pro application for Windows or third party applications like EQMOD and K-Star. The dongle is supplied with cables that support both alt-azimuth and equatorial Synscan Go-To mounts (except the EQ6 Pro when the mounts handset cable should be used instead). The dongle can also be used for updating the mount's motor firmware.

Genuine SkyWatcher product
A genuine SkyWatcher adapter - fully tested and backed by the manufacturer, the logical choice for discerning owners


Simple connection
Use the handbox port of your mount with the supplied cables then a simple A to B USB cable (printer type - user supplied)

  1. Download the latest drivers, firmware, and software for your HP Officejet Pro 8600 e-All-in-One Printer - N911a.This is HP’s official website that will help automatically detect and download the correct drivers free of cost for your HP Computing and Printing products for Windows and Mac operating system.
  2. DOWNLOAD DRIVERS- Log in to TurbineTracker™ website with the Lap top you will be using the USB Download Cable on and download the file located under the “Support Tab” by selecting the “Systems Update” button on the left and clicking on the ADAS-C-053 DRIVER.exehyperlink.

Download Altair Port Devices Driver Windows 7

Please Note: Sky-Watcher mounts which have a built-in USB port do not require this dongle

SkyWatcher SynScan USB Adapter user manual


Altair Software Download

1. Connect to a Skywatcher Telescope Mount
Attach the SynScan USB dongle(RJ45 Jack) to the Hand Control port(RJ12 or RJ45 Jack) on the mount via:

  • Supplied RJ45-to-RJ45 cable, for most equatorial mounts, except EQ6.
  • Supplied RJ12-to-RJ45 cable, for most Alt-Az mounts.
  • Original SynScan hand control cable, for all mounts

2. Connect to a PC
1) Connect the SynScan USB dongle to a PC with a USB A-to-B cable (also used on most printers)
2) The PC should be connected to internet to automatically download the device driver.
3) If the driver is installed properly, a device named Prolific USB-to-Serial Comm Port(COMx) can be found in COM and LPT section of the Windows Device Manager.

3. Connect to an Android Device
1) The USB interface on the Android device must support USB OTG.
2) Depending on the type of the USB interface on the Android device, a USB C-to-B cable, or a USB OTGmicro-to-B cable is required to connect the Android devide and the SynScan USB dongle.

Download Altair Port Devices Drivers

4. Recommended Applications
Windows Platform
1) SynScan Pro App for Windows.
This application is for controlling the telescope mount.
2) MCFirmware Loader
This application if for updating the firmware of the motor controller.
Android Platform
SynScan Pro App.
This application is for controlling the telescope mount. Install from Google Play or http://www.skywatcher.com/download/software/synscan-app/

Download Altair Port Devices Driver Printer

5. Specifications
Power Supply:
from USB Port.
Serial Port (RJ-45):
up to 1
15K bps
3.3V or 5V Level
GND: Pin 1 and Pin 4
RX: Pin 5
TX: Pin 6