11/24/2021

Crystalfontz Port Devices Driver Download

Step 1 of 3: Crystalfontz USB Driver Download and Installation
Step 2 of 3: Connect the Display

Having an issue with your display, audio, or touchpad? Whether you're working on an Alienware, Inspiron, Latitude, or other Dell product, driver updates keep your device running at top performance. Step 1: Identify your product above. Step 2: Run the detect drivers scan to see available updates. Step 3: Choose which driver updates to install.


Step 3 of 3 (optional): Change COM Port
  • Download new and previously released drivers including support software, bios, utilities, firmware and patches for Intel products.
  • Download the Windows CH340 Driver; Unzip the file; Run the installer which you unzipped; In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools Serial Port menu, the COM number for your device may vary depending on your system. Older Windows Driver Version and Instructions. Download the Windows CH340 Driver; Unzip.
  • I was wondering if or when drivers for Windows XP 64 Bit will be available. Microsoft is close to releasing this OS (it's in RC2 right now) and the only thing keeping me from installing the preview of it is the lack of drivers for my Canon printer, and my 634 LCD.
This document describes changing the COM port of a Crystalfontz USB display.
This step is entirely optional. In most cases, the COM port that is automatically assigned by windows will work perfectly well and there will be no reason to change the COM port. Do not change the COM port without a compelling reason.
The drivers should already be installed, hardware connected and the New Hardware Wizard completed before you start this procedure.
These instructions assume Windows XP. Other operating systems will follow a similar pattern.

Right-click the 'My Computer' icon on your desktop, then select 'Properties' from the drop-down menu.
The 'System Properties' dialog box will be displayed. Click the 'Hardware' tab near the top of the properties window.Crystalfontz port devices driver downloads
DriverDevices Once the hardware tab is selected, click the 'Device Manager' button and the device manager will open.
Click on the small '+' to the left of the 'Ports (COM & LPT)' to expand that branch.
The Crystalfontz USB display will be shown. Right-click on the Crystalfontz USB display line and then select 'Properties' from the menu.
Once the properties dialog is displayed, click the 'Port Settngs' tab:

Crystalfontz Port Devices Driver Downloads


On the port settings tab, click 'Advanced'
The advanced settings dialog will be shown. click on the arrow of the 'Com Port Number' drop-down:Devices
Now you can select the new COM port number that you wish to use. Once the new COM port is chosen, click the 'OK' button to apply the changes and close the advanced settings dialog.
Click the 'OK' button of the properties dialog. The device manager will still be shown, but it may not have updated to show the new COM port assignment. Choose 'Action,' 'Scan for hardware changes' from the Device Manager's menu to force an immediate update:
Now the Device Manager will show the updated COM port. Once you have verified that the COM port is assigned as you would like, you can close the Device Manager.
Step 1 of 3: Crystalfontz USB Driver Download and Installation
Step 2 of 3: Connect the Display
Step 3 of 3 (optional): Change COM Port
Hi;
I installed the Crystalfontz USB driver supplied on the Microsoft Update web site. 7-12-06.
After doing so, the installation failed in and error and will not work at all now.
Here are the specifics of my hardware and software:
Crystalfontz USB 634 LCD display connected to a USB port.
Crystalfontz software 1.07 build 230.
Crystalfontz will display the good data collected from Motherboard Monitor in the LCD settings screen. But the USB will not connect to the serial port.
I'm using Motherboard Monitor for data.
Motherboard Moniter version 5.3.7.0. Motherboard Monitor is collecting and displaying good data.
The USB driver downloaded and installed from Microsoft; CFA634-USB version: 1.0.2176.0
I have removed and reinstalled everything and it will not work anymore... (not working is the Com 3 seial port gets an error on bootup and never connects to the display on the LCD panel).
I removed the Motherboard Monitor, I removed the driver for Crystal Control, I removed the Crystal Control software and re installed. I even used an older (and previously working drivers; 2134, 2147, 2154, none of the work anymore).
Can someone tell me the complete removal process and the proper sequince of reinstallation?
Thanks in advance.

Crystalfontz Port Devices Driver Download Windows 10

Looking for additional LCD resources? Check out our LCD blog for the latest developments in LCD technology.