11/24/2021

Cisco Others Driver

The Cisco Aironet wireless adapter does not work for 64-bit Windows. CISCO SYSTEMS AIR-P121AG-A-K9 DRIVER - AmazonGlobal Ship Orders Internationally. Where can take up or bag or down. It worked like a charm untill I upgraded to Windows 7. Have a point in the systems. Do not use any personal information in this password, these are easier to. Does anyone know when or if there is available a Vista driver for the Cisco Aironet Adapter, AIR-CB21AG-A-K9. I desperatly need to use this card and only have a vista laptop. My xp laptop died on me.

downloaddriver-cisco-fnic-2.0.0.59.zipWhy can't I download this file?
Driver ModuleVersion
fnic2.0.0.59

Issues Resolved In this Driver Disk

Driver

Includes general enhancements and bug fixes.

Installing the Driver Disk

Customers should use the Citrix Hypervisor CLI to install this update. Once the driver has been installed, the server must be restarted. As with any software update, Citrix advises customers to back up their data before applying this driver disk.

Please note that the attachment to this article is a zip file. It contains both the driver disk ISO mentioned below, and the source code for the driver. The zip file should be unzipped (to produce the driver disk ISO image), before carrying out the steps below. The source code file is not necessary for driver disk installation: it is provided to fulfill licensing obligations.

Installing as Part of a Clean Citrix Hypervisor Installation

  1. After you have selected your keyboard layout at the first installer prompt, you will be presented with a welcome screen. At this point, press F9 on your keyboard, and insert the CD with the driver disk in it, or use one of the other methods such as installation over the network.
    Note: If installation over HTTP or FTP is to be used, the ISO image must be unpacked at that location (i.e. the installer expects to find the contents of the ISO at that network location, not the ISO itself).
  2. The installer will proceed to attempt to load the driver. If this is successful, you can continue with the installation as normal. Near the end of the installation, you will be prompted to re-insert the driver disk (otherwise known as a Citrix Hypervisor supplemental pack) so that the driver can be installed onto disk. You must re-supply the driver disk at this point. Failure to do so will mean that the installation will not contain the new drivers. After this step, no further action is required.

If the installer fails to load the new driver from the driver disk, it is likely to be because an earlier version of the driver has already been loaded. In general, this is because a hardware component is present that is supported by the version of the driver that ships as part of XenServer (even if another component is present that requires a newer version of the driver). To avoid the existing driver being loaded, use the following procedure.

  1. Reboot the host, leaving the Citrix Hypervisor installation CD-ROM in the drive.
  2. At the boot: prompt, type:

    shell

  3. You will now be presented with a command prompt. Type the following:

    rmmod fnic

    If this succeeds (i.e. there are no error messages printed), the installer's versions of the drivers have been unloaded. If error messages are presented, it is likely that other drivers depend on one or more of the drivers you are attempting to unload. If this is the case, please contact Citrix Technical Support.
  4. Type

    exit

    or press Control+D on your keyboard, to return to the installer.
  5. Use the procedure described above to provide the driver disk to the installer, which should now load correctly.

Installing the update by using the xe CLI

Perform the following steps to install the update remotely using the xe CLI:

  1. Download the update to a known location on a computer that has XenCenter installed.
  2. Upload the update:

    xe update-upload file-name=driver-cisco-fnic-2.0.0.59.iso

    Note: The UUID of the update is returned when the upload completes.


  3. Apply the update:

    xe update-apply uuid=f281244f-cee7-4010-80b2-ab668802cb4e

  4. To complete the installation, restart the host. This ensures that the driver loads correctly.

Files

Update Files

ComponentDetails
Filenamedriver-cisco-fnic-2.0.0.59.iso
File sha25637ef31b2352de84b966250237e18434d286d27ff06acd70b37c3577850763501
Source Filenamedriver-cisco-fnic-2.0.0.59-sources.iso
Source File sha256ae8e2ac4856f8db62f885d49217188775b6aa3342659fc5da1233c470dcf5c2e
Zip Filenamedriver-cisco-fnic-2.0.0.59.zip
Zip File sha25618e668244385d3653a7ddbdf0612166660b21878eb418b134160ceecba163fbd
Size of the Zip file161.5 MB

RPMs Provided

RPM Name
cisco-fnic-2.0.0.59-1.el7.centos.x86_64.rpm


More Information

For a list of the driver versions and the latest driver disk updates available, see Driver versions for XenServer and Citrix Hypervisor.

If you experience any difficulties, contact Citrix Technical Support.

For information on how to build driver disks, refer to Citrix Hypervisor Supplemental Packs and the DDK Guide .

Cisco Drivers For Windows 10

It should also be mentioned that this camera was made for other companies beside Cisco. So if you have a camera that looks like the one pictured here, this may work for you. The following information will help you install drivers for this webcam on a 64-bit Windows computer. Pretty much any computer you buy these days is going to be a 64-bit system. If your computer was made after 2010, odds are you’ve got a 64-bit computer. (Note: this guide has been tested on Windows 7, if it works for you let us know in the comments below)

Cisco Others Driver Downloads

If you’re still using the Cisco VT II webcam, you’re probably like me. You just want to use the camera and you’re not too worried about having the latest and greatest. These webcams were produced on a massive scale for other companies besides Cisco. I’ve been to thrift stores and found huge boxes full of them. Since this is an older webcam it can be difficult to find working drivers for Windows. It should be mentioned, for any Linux users out there, these don’t require additional drivers on most distros from what I’ve seen. Without anymore delay, here we go with the instructions.

Since Cisco doesn’t have 64 bit drivers available that I know of, we are going to use Logitech drivers. It will require a little finagling but literally anyone can do this.

  1. Download qc1051enu_x64 and open it.
  2. Follow the instructions. It should fail at some point, telling you that your system isn’t supported. That is fine, move on to the next step.
  3. Open the following C:LogitechQuickCamWebInstallDriversx64PRO364IPRO364V.inf and replace each 08CE with 08C7.
  4. Open Device Manager. You should be able to access it from the Control Panel > Harware and Sound > Device Manager.
  5. You are looking for an “Undefined Device”. It will probably appear under “Other Devices” and have an exclamation mark by it.
  6. Right click on the device and choose “Update Driver Software…”
  7. Click “Browse my computer for driver software” and click the “Browse” button. Navigate to C:LogitechQuickCamWebInstallDriversx64PRO364 and click the “OK” button.
  8. Click the “Next” button.
  9. Be sure to make sure you do NOT have automatic updates turned on for this driver. There should be a checkbox you will need to deselect while you’re installing the driver.
  10. Continue through the prompts and you should have a working webcam. (Test your cam here)

Cisco Usb Driver Windows 10

If this worked for you, let us know by commenting below with your version of Windows and any tips you have.