Improvements and fixes
Find and expand “Other devices” or “Portable devices” and find your device. If there is a problem with the driver, it should be marked with a yellow exclamation mark. Right click on the driver and choose “Update Driver Software”. Choose “Browse my computer for driver software” “Let me pick a list of device. Microchip products categories include microcontroller, mixed signal, analog, security and Flash-IP solutions, as well as a wide variety of other products.
This update includes a fix for an incorrect device driver (“Microsoft – WPD – 2/22/2016 12:00:00 AM - 5.2.5326.4762”) that was released by a third-party on March 8, 2017 that affected a small group of users with USB connected phones or other media devices that rely on Media Transfer Protocol (MTP). If the driver is on your system, when any of these devices are connected, Windows will try to install this driver. These devices will not be connected until the driver is removed. This incorrect driver was removed from Windows Update the same day, but it may have been downloaded to your computer. After installing this update the incorrect driver will be removed.
How to get this update
This update will be downloaded and installed automatically from Windows Update. To get the stand-alone package for this update, go to the Microsoft Update Catalog website.
If you are not able to connect your phone or media device via USB and are not running one of these Windows versions, you can still remove this driver using the process described here:
Atmel Mobile Phones & Portable Devices Driver Download Windows 7
Hello Experts and Freaks.
General question about USB drivers for programming.
With AVR Studio 4, where Stk500.exe can be used, access to USB programming devices is based on Jungo technology.
With Atmel Studio 7, Jungo way is sort of disabled in the benefit of atmel_winusb native driver, which is used with 7.0atbackendatprogram.exe...
When both Stk500.exe and atprogram.exe need to be used, it leads to painful driver update switches in the device manager (browse my computer..., let me pick from a list...)
However in 7.0ExtensionsApplication I found some Jungo DLL's: LibJungoUSB.dll and JungoInterfaces.dll. Does it mean there's some way to use Jungo with Atmel Studio 7 and its back-end tools?
Thank you for *technical* suggestion, any piece of advice, leads, pointers, trick, loosely related information about this question.
Atmel Usb Driver Download
Some side consideration could be to include LibUSB0 which seems very similar to Jungo technology. It seems this driver is installed during Atmel 7.0. And also it seems it is (was) associated with Olimex tools. Not too sure, that's why I only mention it here sideways.